C1330J - Clausing Lathe 13” Swing over Bed, Geared Head Gap Bed Engine Lathe
13” Swing over bed, Geared Head Gap Bed Engine Lathe, 2 Speed 3 Hp Spindle motor, 30” between centers, 7.5” Swing over the cross slide, 33 to 2000 RPM, 16 Speed, 1.37” Spindle Bore, D1-4 camlock spindle nose, 1.56” Tailstock quill diameter with 3 morse taper bore, Inch/Metric threading with various pitch settings, 230/460 Volts, 3 Phase
Need Help!! Call Us Now!!1-800-323-0972
Features and Benefits:
欧宝官方网站最新入口老人的头车床行业站ard. The quality built into every machine translates into real long term performance for your application. The removable gap plate allows for large face plates to be mounted onto the spindle nose for various turning applications. Camlock Spindles, a wide range of spindle speeds, full length rear splash guard with coolant system, and inch/metric threading make this machine a must have for any machine shop.
Geared head lathes use a belt drive system from the motor to gearbox head. Speed changes are then selected by shifting gear levers into a certain configurations recorded on a legend plate.
Three phase voltage refers to three individual lines that connect to and run voltage through the motor. Each line alternates in a sequence as it reaches its voltage peak. This provides for a more stable flow of voltage and more horsepower to the machine.
Specifications
| Machine Style | Engine Lathe |
| Spindle Speed Control | Geared Head |
| Spindle (Hp) | 3 |
| Swing Over Bed (inch) | 13 |
| Swing Over Cross slide (inch) | 7.5 |
| Swing in Gap (inch) | 19.5 |
| Distance Between Centers (inch) | 30 |
| Bed Width (inch) | 7.3 |
| Spindle Bore (inch) | 1.375 |
| Spindle Nose (camlock) | D1-4 |
| Spindle Nose Taper | 4 MT |
| Number of Spindle Speeds | 16 |
| Spindle Speed RPM Range | 33 - 2000 |
| Cross Slide Travel (inch) | 7.5 |
| Width of Cross Slide (inch) | 4.72 |
| Top Slide Travel (compound) (inch) | 3.5 |
| Tailstock Quill Diameter (inch) | 1.56 |
| Tailstock Quill Travel (inch) | 4.375 |
| Tailstock Quill Taper | 3 MT |
| Longitudinal Feed Range (in/rev) | 0.008 – 0.041 |
| Cross Feed Range (in/rev) | Appx 1/3 Longitudinal Range |
| Number of Inch Pitches | 47 |
| Range of Inch Pitches | 4 - 144 |
| Number of Metric Pitches | 44 |
| Range of Metric Pitches | 0.2 - 14 |
| Number of Diametral Pitches | 30 |
| Range of Diametral Pitches | 4 - 44 |
| Number of Module Pitches | 24 |
| Range of Module Pitches | 0.3 – 3.5 |
| Coolant System | Yes |
| Voltage Required | (220) 230/460 |
| Phase | 3 |
| Machine Foot Print (LxWxH) (inch) | 65 x 42 x 62 |
| Machine Weight (lbs.) | 1,474 |
Machine Features:
- 30” between center distance
- D1-4 Camlock spindle nose
- 为16-step 2-Speed马达驱动滚筒d ranges from 33-2000 rpm
- 3 Hp (2.25Kw) spindle motor
- 13” swing over the bed
- Induction hardened and precision ground bed
- Headstock gears are precision hardened and ground
- Precision tapered roller spindle bearings
- Bed wipers and apron mounted one-shot lubrication pump
- Universal gearbox provides comprehensive range of metric, imperial (inch), M.P., and D.P. threading
- Foot spindle brake
- Equipped with interlocked chuck guard, full splash guard, and leadscrew cover
- 4-way turret tool post
- 6” 3-jaw chuck
- Steady rest w/rollers .38” to 2.75” capacity
- Micrometer bedstop w/5 position turret positions
- A one year warranty backed by Clausing Service Center dedicated to support our customers with parts and service